ELIN company invite you for buy the best Lighting products.

Complete the below form for consulting.

Industrial lamp post lights suppliers | Lamp post for sale

What you will read ...

How tall should a residential lamp post be?What is the best solar lamp post?How tall Street post light should be?Indeed, that depends on various factors like;What are Street light posts made of?What is the height of a street lamp?Best Solar Lamp PostsHow to Choose Between a Wet or Damp Rated Light Fixture

Industrial lamp post lights suppliers, solar lamp, post-lights-modern outdoor post-lights-street light post-led post lights Like thousands of other productions which are manufacturing in different areas of the world have a reasonable method of producing any type of productions. When it comes to brightening up the night, post lamps are great options for lending your outdoor ensemble a flexible touch, as they can be mounted wherever you need them most. As an example, a crafted from an oil-rubbed bronze-finished base with a seeded glass shade evokes traditional lanterns for an industrial touch in your outdoor ensemble.

How tall should a residential lamp post be?

For residential lamp post height is 7mts, 9mts, 16mts This also depends on the power rating of luminaire, distance between two poles, road type, road width There is another application as high mast lighting on expressways or highways which have min-height of 30mts of pole and luminaries are arranges in all directions of the pole to cover larger area. Apart from this, Solar street lights installed at the perimeter of an industrial building can be 4–5 mts.


More than that, it varies greatly, depending on a number of factors, including your opinion of what “normal” is. Residential lamp post is generally from 8′ to 50′. Above 50′ it’s considered high mast which is technically street lighting but probably not what you’re asking about. It depends on the type of fixture, the environment, the type of road, the policies of the owner of the light (DOT, utility, city, etc.), the output of the fixture, etc.



What is the best solar lamp post?

Every garden, front yard or pathway needs a touch of sophistication. Solar lamp posts are just the way to add that touch. You can add them without breaking the bank with electricity bills. Once you install them, they’re almost completely self-sufficient. That is because of the subtle solar panels that sit on top of every solar lamp post.

The solar lamp is quite simply a low voltage lamp using a battery that is charged by an internal or part of constructed using solar panel, so it needs no external wires… sometimes it has special functions built in such as those used for security lights, that switch it on and off automatically, or solar street lights that switch on at dusk and switch off at dawn.

The best solar lamps are as followings:

Best Overall: Gama Lamp Post

Runner-Up: Aluminum Solar Lamp Post

Another Favorite: Gama Sonic Lamp Post

The Best Mid-Range Option: Home Outdoor Light

The Best Pick for a Tight Budget: Garden Solar Lamp Post

The “Getting Fancy” Option: Sun-Ray Lamp Post

How tall Street post light should be?


The height of the street light poles varies between 10 to 60 feet depending on the usability and the purpose of the lighting conditions. Most commonly the high mast lighting poles are used and installed where the most substantial traffic is in function (especially at the highways.) These types of poles are ranged between 18 to 60 feet and illuminate a larger area of the street. Light poles that range between 10 to 18 feet are in a function to light up the streets of the city.


  • Indeed, that depends on various factors like;
  • Wattage of bulb
  • What is the distance between the poles?
  • The intensity of the light required
  • Illumination area of one Light

What are Street light posts made of?

The street lighting fixture has two parts luminaire and lamp. The lamp is the source of light and luminaire is all things that control light and electrical power to the lamp. A street lighting fixture is essentially a combination of lamp and its associated gear like reflector and ballast. These parts are manufacturing separately and assembling to get the final product street light.


  • The main parts are;


  • Lamp — Manufacturers of lamp supply these.
  • Reflector, lamp gear, and housing — these are usually ready by the luminaire manufacturer and assembler in the plant.

What is the height of a street lamp?


The pole that the lighting is mounting on is generally at least 30 m (98 ft.) tall (under this height it is speaking of as conventional lighting system), while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures riding around it. In some other places, The streetlight mounting height was 25 ft (7.6 m). There is a formula that takes into consideration the light fall-off from that lamp, the angle that the lamp illuminates and the acceptable lighting level at the edge of the lamp’s illumination area. With a higher and/or stronger light, you can illuminate a larger area. This allows you to place fewer poles, which is generally a cost-saving factor, especially for maintenance.


However, there is also a minimum height for poles that range over the road. They need to exceed a city’s limit for tall vehicle clearance by enough to not need warning signs. This is often around 25 feet. The real value normally read out by city ordinance is not the height. (They are probably buying pre-fab poles, which only come in certain sizes). It is the spacing between the lights.


Best Solar Lamp Posts


A solar lamp also famous as solar light or solar lantern, is a lighting system comprising of an LED lamp, solar panels, battery, charge controller and there may also be an inverter. The lamp operates on electricity from batteries through the use of solar photovoltaic panels.

  • The best solar lamps have these features:
  • Brightness

Generally, the brightness of lights is measured in lumens, with more lumens meaning brighter light. We considered lights with medium brightness preferable, but surely this preference differs from situation-to-situation, so be sure to check out the actual number of lumens when making your decision. When considering brightness, you should also think about the temperature of the lights. Many of the solar lamp posts come with either a warm or cool option, and your preference will likely depend on where you want the lights to be. We preferred lights that have both options when possible.

  • Design Considerations

Beyond the stake vs. planter option, there are other aesthetic options as well, such as shape and number of lights. We tried to present a varied list, so there are a few different options of solar lamp posts, depending on what design you’re looking for. Some are simpler, while others are flashier, so you have many options.

  • Height

As we mentioned before, height can make or break a lamppost, especially depending on where you hope to put it. The heights can vary significantly, so we were sure to be clear about how tall the lamp post is when installed.

  • Run Time

Run time refers to the amount of time that you can expect the light to remain illuminated, after being fully charged. Usually run time is a very ballpark measure because the lights don’t generally get fully charged every day, but you can think of the run times as comparative – if one model has a longer run time than another model, then it probably generally lasts longer, in equal charge situations.

How to Choose Between a Wet or Damp Rated Light Fixture

Here we want to know the Importance of Damp and Wet Location Lighting. The main reason to use damp and wet-rated light fixtures is safety. Lights depend on electrical currents for power, and water serves as a conductor. When it comes in contact with electricity, water can cause fires or electrocution. That’s why it’s important to prevent moisture from building up inside the electrical parts of a light fixture.

Using properly-rated fixtures also ensures the longevity of the bulb. A damp-rated light installed in a wet environment may not work for long. The same applies to dry-rated lights in damp environments. Use the rating system to sustain the performance of the lights around your home. Properly rated bulbs allow you to install landscape and patio lighting in areas where dry-rated lights would not work.


When you want to install lighting around gardens and leisure areas, it’s important to use damp and wet-rated lights. These specific fixtures should suit the environment. Those in covered areas benefit from damp-rated fixtures, and those without covers, including those set directly against the ground, require wet ratings.


Your knowledge of wet and dry ratings will help you get the most value from your lights. These labels show you where you can install specific fixtures, so no moisture builds up inside. Make sure your fixtures are rated for the environments where you want to install them. There are plenty of modern, vintage and retro styles to choose from.

Mahdi Ramezani

For Consulting and Ordering Click below button.

Consulting and Ordering

ELIN company invite you for buy the best Lighting products.

Complete the below form for consulting.


Leave a Reply

Your email address will not be published. Required fields are marked *